Go Down

Topic: Upload stopt at 95% (Read 394 times) previous topic - next topic

stijnh

Hi,

This is my first arduino ever (Arduino Nano V3.0) and when I start uploading the Blink example or another program, it starts uploading and my arduino gives signals (correct arduino and port selected) but when it reaches like 95% it stops uploading forever without giving me an error. I tried it on a Windows 7 and 8.1.


James C4S

Turn on "Verbose Output" in the Preferences, and try again.
Capacitor Expert By Day, Enginerd by night.  ||  Personal Blog: www.baldengineer.com  || Electronics Tutorials for Beginners:  www.addohms.com

stijnh

If I do that I can see an error about my drivers, but my drivers are up to date?

robtillaart

We cannot see the error from here ...
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

stijnh

This

robtillaart


1) have you selected the right board?
2) check your wiring?
3) try another USB port of your PC

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

James C4S

Instead of a screenshot, select the output text, copy it, and paste it into a post.

Make sure you wrap it with [code][/code] tags.
Capacitor Expert By Day, Enginerd by night.  ||  Personal Blog: www.baldengineer.com  || Electronics Tutorials for Beginners:  www.addohms.com

stijnh



1) have you selected the right board?
2) check your wiring?
3) try another USB port of your PC



1 Yup, tried other ones too
2 which wiring do you mean
3 tried all of them + another pc

Go Up