Go Down

Topic: How to learn fabrication (Read 915 times) previous topic - next topic

seal308

Do i need to go to some technical college to learn fabrication?
Are there other ways.
Specifically for the basics like soldering etc.

Thanks

Peter_n


http://www.youtube.com/watch?v=QKbJxytERvg
Octal is 7 bits. Octet is 8 bits. An Octopus has four pairs of arms. October is the tenth month. An Octillion can be 10^27 or 10^48. An Octave is the interval between notes of half or twice the frequency. And last but not least: Octyl on its own is not really something.

LarryD

YouTube is a good place look.

Lots of tutorials around. example:
http://www.hobbytronics.co.uk/tutorials-code

Ask in the forums when you come to a situation where you need some instruction.

Look at "instructables"
http://www.instructables.com/tag/type-id/category-technology/channel-arduino/
The way you have it in your schematic isn't the same as how you have it wired up!

arslanzaidi

#3
Sep 12, 2014, 05:07 pm Last Edit: Sep 12, 2014, 05:09 pm by arslanzaidi Reason: 1
Start fabricating! Yes really! some things are learnt only by doing them! I am a mechanical engineer and have studied fabrication for 4 years but believe me! experimenting with things, playing on field, trial and error methods, frying up components is the best teacher!

In my opinion, grab a solder, wire, some components and start playing!

Go Up