Pages: [1]   Go Down
Author Topic: arduino support in avrdude 5.10  (Read 469 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 3
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

greetings,

new Duemilanove on os x, tests fine with arduino 0018, uploads, etc.

despite the added "arduino" programmer support in avrdude 5.10, i'm still getting "no response" messages when trying to upload directly from the command line as so:

Code:
avrdude -V -F -c arduino -p m328p -b 19200 -P /dev/cu.usbserial-A600aiKC -U flash:w:blink.hex

can somebody confirm that this functionality has actually been tested and proven?

many thanks.
« Last Edit: March 03, 2010, 06:01:49 pm by tehn » Logged

Forum Administrator
Cambridge, MA
Offline Offline
Faraday Member
*****
Karma: 11
Posts: 3538
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

If you have an ATmega328 on your board, you probably want to be uploading at 57600 not 19200 baud.
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 3
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

that fixed it! great thanks!
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 6
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hello,
is it still necessary to patch avrdude 5.10 with serjtag 0.3 and using the D2XX-driver to get it working?
i'm a bit lost after 1 day of patching, compiling and still get only "programmer is not responsing"...
i use arduino018 and snow leopard.

thank you, pest
Logged

Pages: [1]   Go Up
Jump to: