Go Down

Topic: Servo only rotates about 150º (Read 663 times) previous topic - next topic

GnobarEl

Hi all,
I just get my servos yesterday, I'm using the servo library to control them, but they only rotate about 150 degrees.
Any idea? Can it be solved with code?

Other problem I have is with control, they aren't very smooth, seams they are glitching.

Thanks for your help.

Groove

You don't say which servos you've got, but not all will rotate 180 degrees.
Per Arduino ad Astra

GnobarEl

Description: Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control cable, and mounting hardware. This servo is very similar in size and specifications to the Hitec HS-55.

Its a copy of Hitec HS-55

Groove

And does your Hitec HS-55 rotate 180 degrees?
(I'm a Futaba man, myself)
Per Arduino ad Astra

GnobarEl

That's a good question, I believe its 180, but I'm not sure.
Anyway, I already talked with the shop and I will replace them for other models.
By code, is anyway to make it run more smooth?




Groove

Quote
By code, is anyway to make it run more smooth?

What code?
Per Arduino ad Astra

Go Up