Go Down

Topic: Uploading (Read 6 times) previous topic - next topic

Zazw3

Jan 22, 2011, 12:02 am Last Edit: Jan 22, 2011, 12:04 am by zazw3 Reason: 1
Im having trouble uploading to my Uno ive never done it before and ive tried pretty much everything in trouble shooting im using 32bit Vista and it says:

Binary sketch size: 996 bytes (of a 32256 byte maximum)
avrdude: stk500_getsync(): not in sync: resp=0x30
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51


thanks Zazw3

Enginerd

I'm getting the exact same error on Windows 7 32-bit. I was able to upload sketches without any problems a couple of hours ago and now I can't upload anything or connect to the serial monitor.


Zazw3

neither of us are using a mac......

Zazw3

ahahaahh got it....wrong serial port....

Enginerd

I managed to get mine working again. All I did was plug in my USB hub and plug my arduino into that instead of directly into my computer. I have no clue why that changed anything, I was able to plug it directly into my computer without any problems before.

Go Up