Go Down

Topic: avrdude programmer is not responding (Read 27 times) previous topic - next topic

pe lang

i have the same problem. other boards are fine, just the uno not.
osx 10.4.11 / 0021 / newest FTDIUSBSerialDriver

mariolh's workaround dos the job, but yes...not very elegant

:(

Cinezaster

I have the same problem with the UNO.
Running a G5 quatro powermac 10.4.11.

My mac recognizes the board as a modem as it should. And I can choose the right serial port (modem).
But if I start to upload it gets a sync or not responding problem.

I tried a few things and the only thing that sometimes works  is holding the reset button starting the upload. And release it when it's compiled. Or sometimes just push the reset button when it's compiled.
If I try it 15 times it will work only ones. A bit frustrating :-/. So there got to be a work around for this problem.

I thought the UNO would be even easier to use. But that ain't the truth for me. Luckily a have a few other previous gen boards lying around.

Bubba5656 let us know if you got the board running on windows 7?
ARDUINO-JAM  BELGIUM 2012

ifearthenight

I'm having the exact same problem but don't seem to be able to fix it regardless of when I push/hold reset.

Also, my led  (L) is already blinking straight out of the box...is that supposed to happen?

PaulS

Quote
Also, my led  (L) is already blinking straight out of the box...is that supposed to happen?

No. It should only blink when it has power connected to it. If yours was blinking when you took it out of the box, you should put it back in the box and return it.

Go Up