Pages: [1]   Go Down
Author Topic: AVR-USB firmware  (Read 1369 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Jr. Member
Karma: 0
Posts: 91
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

A Firmware-Only USB Driver for Atmel AVR Microcontrollers

A USB device without dedicated USB hardware

AVR-USB is a firmware-only implementation of a USB 1.1 compliant low-speed device for Atmel's AVR microcontrollers. It runs on any AVR microcontroller which has at least 2 kB of Flash memory, 128 bytes RAM and can be clocked at 12 MHz. No UART, timer, input capture unit or other special hardware is required (except one edge triggered interrupt).

AVR-USB can be licensed freely under an Open Source compliant license or alternatively under a commercial license.

    * Fully USB 1.1 compliant low-speed device, except handling of communication errors.
    * Supports two endpoints: one control and one interrupt endpoint.
    * Transfer sizes up to 254 bytes.
    * Comes with freely usable USB identifiers (Vendor-ID and Product-ID pair).
    * Customizable sections are written in "C" and are well commented.
    * Delivered with fully functional example applications.
    * Only about 1400 to 1500 bytes code size for basic functionality.
    * You can choose the License: Open Source or commercial

 Bigger Bigger  Smaller Smaller  Reset Reset

wow. I wonder if that would  make a $5 Arduino possible?
the schematic is so simple...


Pages: [1]   Go Up
Jump to: