Pages: [1]   Go Down
Author Topic: Web Client Programming  (Read 1088 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 4
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello,

I am new to the arduino platform. Im interested in programming a adruino web client that can make a HTTP request (GET or POST) to a "URL".  The website is hosted with a hosting company and hence do not have a direct ip address access to the website.


Please guide me with libraries to be used. I have the arduino (ATMEGA 168) and ethernet module (ENC28J60) with me.

Please excuse me if there are mistakes my post.

Thanks
Abin
Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 223
Posts: 13896
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Check - http://www.nuelectronics.com/estore/index.php?main_page=product_info&cPath=1&products_id=4&zenid=4f8763dd32227d54ee11ac472d5c09a4

There is a library and there are examples similar to what you're looking for, search quote below

Quote
Programming Notes

Ethernet shield V1.0 schematic download here

Open-source TCP/IP stack -- available as an Arduino library, download here
Example codes included in the library

    * ethernet PING example
    * Web server example
    *  
    * Web server with temperature sensor
    * New- Web client example with sensor readings/li>

Please refer to the project note for ethernet shield a web server example
a web client example
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Pages: [1]   Go Up
Jump to: