Pages: [1]   Go Down
Author Topic: usb arduino + director + multiple push buttons  (Read 1084 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hello,

i am trying to connect the arduino board over usb to director.
i tried this code by wilson http://userwww.sfsu.edu/~infoarts/technical/arduino/wilsonserialIO.txt and i am using the serialXtra by geoff smith.

the examples work fine on the board, but somehow i get strange results inside director:
when i push the first button, which is connected to pin3, then i get director not to read the H (H for high, and L for low) - when i push the second button which is connected to pin4 then director reads an H at this location. if i now push BOTH buttons, then director reads also an H for pin 3.

as i have not so much idea about electricity flows (just started) here the image of the wiring, maybe there is something wrong ?
(i am using two 10kOhm resistors)
http://lia.sil.at/ard/multiplePushButtons.html

any help would be appriciated!

all the best

lia.-

Logged

Pages: [1]   Go Up
Jump to: