Go Down

Topic: extract .hex file from arduino program (Read 9 times) previous topic - next topic

herctrap


dut

how we can get .asm file from Arduino software?..
it is posible?
dut eden rockes

robtillaart

Quote
how we can get .asm file from Arduino software?..
it is posible?

~\arduino-0021\hardware\tools\avr\bin\avr-objdump.exe

check the -D or -d  option in the manual.
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

floresta

#8
Jan 20, 2011, 10:02 pm Last Edit: Jan 20, 2011, 10:07 pm by floresta Reason: 1
Code: [Select]
and what about the fuses?I have successfully switched back and forth between using the Arduino IDE / bootloader and Studio 4 / programmer without changing the fuses.  It's not the best solution and may not work if the op codes are enhanced in the future but currently I assume that the values in the unprogrammed bootloader memory space are being treated as NOPs (no operation) when the processor incorrectly starts its execution there.

Don

Go Up