$ lsusb # not much shownBus 005 Device 005: ID 2341:0001 $ find /sys/devices/pci0000\:00/ -name '*tty*'/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/tty/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/tty/ttyACM0$ for ix in $(find /sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2 -type f); do echo "$(basename $ix):" ; cat $ix ; done...idVendor:2341idProduct:0001...manufacturer:Arduino (www.arduino.cc)product:Arduino Unoserial:649383233313513181C0...uevent:MAJOR=166MINOR=0DEVNAME=ttyACM0$ stty 2000000 inpck -ixon -icanon -hupcl -isig -iexten -echok -echoctl -echoke min 0 -crtscts </dev/ttyACM0$ ./writeread_bonus /dev/ttyACM0 2000000 ./ttester 3>myout.txt stdalt opened; Alternative file descriptor: 3Opening port /dev/ttyACM0;Got speed 2000000 (4107/0x100b);Got file/string './ttester'; opened as file (102400).write_thread_function spawned EAG: 0, WR: 1, WF: 0, read: 102400, FRD: 59, TOU: 14080, OBS: 18944, RB/s: 14622.06, WB/s: 13019.38 +++DONE+++Wrote: 102400 bytes; Read: 102400 bytes; Total: 204800 bytes. Start: 1286748859 s -251915 us; End: 1286748861 s 708822 us; Delta: 2 s 960737 us. 2000000 baud for 8N1 is 200000 Bps (bytes/sec).Measured: write 34585.98 Bps (17.29%), read 34585.98 Bps (17.29%), total 69171.97 Bps.
Well, to start with the 8U2 is a 16MHz AVR, so its UART probably completely tops out at 2Mbps (and perhaps at the 1Mbps max of a non-U2X configuration.) And then all of the arguments that people have made about how few cycles a 16Mhz AVR will have to run 2Mbps async will apply twice. Or maybe 4 times.
There are lots of hits on "LUFA AVR Throughput." Have fun
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16