Go Down

Topic: Addition to Wire reference page (Read 392 times) previous topic - next topic

Tim Stamp

Wire.
<rant>As a reference page, it really should reference some technical details and limitations of the library - like the fact that I2C can only buffer 32 bytes of data - meaning if you send more than 32 bytes in a single transmission it silently ignores every byte above the 32nd.
</rant>

This took me an hour or more to figure out, can someone please add a note to this effect to the following reference docs:
http://arduino.cc/en/Reference/WireSend
http://arduino.cc/en/Reference/Wire

Thanks!

Go Up