Go Down

Topic: Cannot upload to arduino bluetooth (Read 437 times) previous topic - next topic

whatevernot

When I try to upload a sketch, it times out with error:


Binary sketch size: 896 bytes (of a 14336 byte maximum)
hardware/tools/avr/bin/avrdude -Chardware/tools/avr/etc/avrdude.conf -v -v -v -v -pm168 -cstk500v1 -P/dev/tty.arduinoserial -b19200 -D -Uflash:w:/Users/parki/repo/arduino/misc/blink/applet/blink.hex:i


avrdude: Version 5.4-arduino, compiled on Oct  9 2007 at 11:20:31
        Copyright (c) 2000-2005 Brian Dean, ww.bdmicro.com/

        System wide configuration file is "hardware/tools/avr/etc/avrdude.conf"
        User configuration file is "/Users/parki/.avrduderc"
        User configuration file does not exist or is not a regular file, skipping

        Using Port            : /dev/tty.arduinoserial
        Using Programmer      : stk500v1
        Overriding Baud Rate  : 19200
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: Q [51]   [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

Any ideas welcomed - I'm stumped.

Thx.

Brian...

Go Up