Pages: [1]   Go Down
Author Topic: Arduino Uno Firmdata library problem  (Read 809 times)
0 Members and 1 Guest are viewing this topic.
Canada
Offline Offline
Full Member
***
Karma: 0
Posts: 138
Power Level is futile (if < 9 000)
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello.
I was trying a sketch in Processing from a friend of mine. We used the exact same code with the same RGB led and same wiring.

The sketch is bringing up a color wheel and when you choose a color, your RGB led become of that color.

http://pastebin.com/XZrDGbFN
Processing sketch


http://www.webdesign.org/img_articles/15053/Color-Wheel.jpg
Color wheel :  (save as "wheel.jpg" in your data folder)  

http://www.arduino.cc/playground/Interfacing/Processing
Using the Processing library v. 0017

and I upload the sketch StandardFirmdata  from the Arduino IDE v. 0021.


So the problem is my RGB led is alway White and does nothing. No problem on the side of my friend.

The only difference we technically have is that he used  the IDE v. 0020  and he have an Arduino duemilanove.

(I have a UNO)

Can anyone solve this mystery?
So far our theory is about the missing FTDI of the UNO.
« Last Edit: November 19, 2010, 06:00:21 pm by kraig » Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have a similar problem with the UNO, i cant get it to work with firmdata and as3glue the led on pin13 gets powered randomly
Logged

Australia
Offline Offline
Newbie
*
Karma: 1
Posts: 25
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Do you have any handphone synching software running on your machine? I had all sorts of oddness until I deleted the Sony Ericsson PC Suite.
Logged

Canada
Offline Offline
Full Member
***
Karma: 0
Posts: 138
Power Level is futile (if < 9 000)
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Nope.
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I solved the problem changing baud rate from 57600 to 115200
Logged

Canada
Offline Offline
Full Member
***
Karma: 0
Posts: 138
Power Level is futile (if < 9 000)
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Going to try that someday.
Thanks.
Logged

Pages: [1]   Go Up
Jump to: