Pages: [1]   Go Down
Author Topic: Sketchs have never imported to my UNO  (Read 3510 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I just bought an UNO and am having a hard time getting sketchs to upload.  I always get a message that says user confiuration does not exist.  Maybe i did not install the driver properly.  I am running on OSx.  Please help.  I want to get started using my arduino and have come to a complete stop
Logged

Seattle, WA USA
Offline Offline
Brattain Member
*****
Karma: 547
Posts: 45982
Seattle, WA USA
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
I am running on OSx
There are dozens of versions of OSx. Can you narrow it down just a little?

Quote
I always get a message that says user confiuration does not exist.
When you do what? Screen shots and step by step actions would be helpful.
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

When I hit the upload icon while holding shift this is what I see in the text box at the bottom.   Binary sketch size: 1018 bytes (of a 32256 byte maximum)
/Volumes/Arduino 1/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -C/Volumes/Arduino 1/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P/dev/cu.usbmodem0000103D1 -b115200 -D -Uflash:w:/tmp/build2547085465394088275.tmp/Blink.cpp.hex:i

avrdude: Version 5.4-arduino, compiled on Oct  9 2007 at 11:20:31
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         System wide configuration file is "/Volumes/Arduino 1/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
         User configuration file is "/Users/justintillson/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port            : /dev/cu.usbmodem0000103D1
         Using Programmer      : stk500v1
         Overriding Baud Rate  : 115200
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Recv: . [86]
avrdude: stk500_getsync(): not in sync: resp=0x86
avrdude: Send: Q [51]   [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
I The tx and Rx lights flicker for just a few seconds and the pre installed plink program runs again.
Logged

Pages: [1]   Go Up
Jump to: