Pages: [1]   Go Down
Author Topic: TimerAlarm library issue!  (Read 1151 times)
0 Members and 1 Guest are viewing this topic.
Fidenza, Parma
Offline Offline
God Member
*****
Karma: 9
Posts: 783
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I'm trying to turn a LED on at 7.30 updating the time from an NTP server, the time is updated but the timer does not work! Can anyone help me?


Code:
/*
 * Time_NTP.pde
 * Example showing time sync to NTP time source
 *
 * This sketch uses the UDP supplied with th Ethenet library from 0019
 */

#include <Time.h>
#include <SPI.h>
#include <Ethernet.h>
#include <Udp.h>
#include <TimeAlarms.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
byte ip[] = {  192, 168, 1, 44 }; // set the IP address to an unused address on your network

unsigned int localPort = 8888; // local port to listen for UDP packets

byte timeServer[]  = { 192, 43, 244, 18}; // time.nist.gov

const int NTP_PACKET_SIZE= 48; // NTP time stamp is in the first 48 bytes of the message

byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets



time_t prevDisplay = 0; // when the digital clock was displayed
const  long timeZoneOffset = 0L; // set this to the offset in seconds to your local time;

void setup()
{
  // start Ethernet and UDP
  Ethernet.begin(mac,ip);
  Udp.begin(localPort);
  pinMode(9,OUTPUT);
  Serial.begin(9600);
  Serial.println("waiting for sync");
  setSyncProvider(getNtpTime);
  while(timeStatus()== timeNotSet)
    ; // wait until the time is set by the sync provider
      Alarm.alarmRepeat(7,30,0, SvegliaPC);  // 8:30am every day
//      Alarm.alarmRepeat(22,29,0, SvegliaPC);  // 8:30am every day
}
void SvegliaPC(){
  digitalWrite(9,HIGH);
Serial.println("ESEGUITO!");
  delay(1000);
  digitalWrite(9,LOW);
}
void loop()
{
    Alarm.delay(1000);
  if( now() != prevDisplay) //update the display only if the time has changed
  {
    prevDisplay = now();
    digitalClockDisplay();
  }
}


void digitalClockDisplay(){
  // digital clock display of the time
  Serial.print(hour());
  printDigits(minute());
  printDigits(second());
  Serial.print(" ");
  Serial.print(day());
  Serial.print(" ");
  Serial.print(month());
  Serial.print(" ");
  Serial.print(year());
  Serial.println();
}

void printDigits(int digits){
  // utility function for digital clock display: prints preceding colon and leading 0
  Serial.print(":");
  if(digits < 10)
    Serial.print('0');
  Serial.print(digits);
}

/*-------- NTP code ----------*/

unsigned long getNtpTime()
{
  sendNTPpacket(timeServer); // send an NTP packet to a time server

  unsigned long startMillis = millis();
  while( millis() - startMillis < 1000)  // wait up to one second for the response
  {  // wait to see if a reply is available
    if ( Udp.available() )
    {
Udp.readPacket(packetBuffer,NTP_PACKET_SIZE);  // read the packet into the buffer

//the timestamp starts at byte 40 of the received packet and is four bytes,
// or two words, long. First, esxtract the two words:
unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]);
// combine the four bytes (two words) into a long integer
// this is NTP time (seconds since Jan 1 1900):
unsigned long secsSince1900 = highWord << 16 | lowWord;
// now convert NTP time into Arduino Time format:
// Time starts on Jan 1 1970. In seconds, that's 2208988800:
const unsigned long seventyYears = 2208988800UL;
// subtract seventy years:
unsigned long epoch = secsSince1900 - seventyYears;

return epoch;
    }
  }
  return 0;   // return 0 if unable to get the time
}

// send an NTP request to the time server at the given address
unsigned long sendNTPpacket(byte *address)
{
  // set all bytes in the buffer to 0
  memset(packetBuffer, 0, NTP_PACKET_SIZE);
  // Initialize values needed to form NTP request
  // (see URL above for details on the packets)
  packetBuffer[0] = 0b11100011;   // LI, Version, Mode
  packetBuffer[1] = 0;     // Stratum, or type of clock
  packetBuffer[2] = 6;     // Polling Interval
  packetBuffer[3] = 0xEC;  // Peer Clock Precision
  // 8 bytes of zero for Root Delay & Root Dispersion
  packetBuffer[12]  = 49;
  packetBuffer[13]  = 0x4E;
  packetBuffer[14]  = 49;
  packetBuffer[15]  = 52;

  // all NTP fields have been given values, now
  // you can send a packet requesting a timestamp:
  Udp.sendPacket( packetBuffer,NTP_PACKET_SIZE,  address, 123); //NTP requests are to port 123
}

Logged

ArduMAP: Mappa degli utenti che utilizzano Arduino.
http://www.guglio.net/ArduMAP

Pages: [1]   Go Up
Jump to: