Pages: [1]   Go Down
Author Topic: Arduino Uno - Sketch won't start/saved after power off  (Read 3418 times)
0 Members and 1 Guest are viewing this topic.
Sydney
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,

I have problem with my Arduino Uno SMD, If I upload the program it works fine, when I unplug the USB then plug back in, I get the flashes on L led (pin 13 led) and the sketch will not run. hitting reset doesn't help. I have to re-upload the program every time I plug the Arduino Uno. seems like the sketch can not be kept in memory after unpluging the board. But while the board is pluged if I hit press button it will reboot and run the sketch. It doesn't matter which code I am using, it's the same behaviour even for sample blinking code.
any one have any idea about this issue?

But it was working fine for first few test. I was able to control my servo and also dc motors but after few times, now I have this problem. can any one help me with this issue?
Logged

MBH

Dresden / Germany
Offline Offline
Sr. Member
****
Karma: 4
Posts: 451
Entwicklungsklaus
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset


Hi!

Hope this is a answer... youre not alone....
http://arduino.cc/blog/2011/01/20/issues-with-the-new-arduino-uno-smd-edition/

Welcome in the Arduino Community!

Greetings ChrisS
Logged

Sturmfabrik - mediale Dienstleistungen
www.sturmfabrik.de

Sydney
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi Chris,

Thank you for your help, yes my board serial number is in that range.
Maybe I am going to buy Pocket AVR Programmer from sparkfun to fix it my self.
so the only problem is that bootloader thing?

can you tell me is there any special procedure to unplog the board as there is no safe remove for it? I thought that I have damaged the memory part during pluging and un pluging.

Thanks,
Mani
Logged

MBH

Dresden / Germany
Offline Offline
Sr. Member
****
Karma: 4
Posts: 451
Entwicklungsklaus
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset


Hello, i think your board is fine.

Plug/Unplug will do no damages...

Do you know what an isp is, and do you got one?

The only thing is to "burn" the right / actual bootloader to the board, and everything would be fine and running.

Greetings ChrisS
Logged

Sturmfabrik - mediale Dienstleistungen
www.sturmfabrik.de

Offline Offline
Newbie
*
Karma: 1
Posts: 7
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have the same problem, and Im a total noob and have no idea on how to fix this smiley-sad
Logged

Forum Administrator
Cambridge, MA
Offline Offline
Faraday Member
*****
Karma: 11
Posts: 3538
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

If you're having this problem, you should be able to contact your distributor (probably SparkFun) for a replacement. 

The board isn't actually forgetting the sketch; instead, the bootloader is getting stuck in an infinite loop on startup.  The fix to the bootloader source code was actually rather simple, but reflashing it requires an ISP.
Logged

Bordeaux - France
Offline Offline
Newbie
*
Karma: 0
Posts: 17
I Void Warranties
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I received one of these boards, re-flashed it with a quickly homemade parallel ISP programmer ( http://arduino.cc/en/Hacking/ParallelProgrammer ), worked fine smiley
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am very new to this and i uploaded the code to my Arduino Uno but it does nothing once it is uploaded please help
Logged

Pages: [1]   Go Up
Jump to: