Pages: [1]   Go Down
Author Topic: Prob with USB Host Shield with an Ethernet Shield (from old forum)  (Read 3637 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
God Member
Karma: 3
Posts: 766
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

The old forum topic:,28744.msg212881.html#msg212881

I tried using the Sparkfun USB HOST SHIELD and the Arduino official Ethernet shield together. They came into conflict!

So, in order to not modify one of two shieldd, I did the following:
I connected the USB host shield to the Ethernet shield using some headers, I took the 10-pin header and put it out, then I made a bridge between the pin 10 and the pin 6, and finally I changed (as Felis says to do), the SS pin in Max3421e_constants.h file from 10 to 6.

Done, everything works fine without making any changes to any of the shields!



Pages: [1]   Go Up
Jump to: