Go Down

Topic: Need official ethernet shield jack vertical dimension (Read 1 time) previous topic - next topic

liudr

So I am revising my Phi-1 shield design to make it compatible with the official Ethernet shield. Problem is, I don't have the shield. I don't see myself having enough money and using that shield. I want to know how tall the Ethernet jack is. Could someone measure it in mm or inch for me? Thanks.

From pics I can find, I sense that it is taller than the female headers, which is my concern. I can work out the lateral dimensions from the design files but not the height. Thank you!

djc


I want to know how tall the Ethernet jack is.


Go to http://arduino.cc/en/Main/ArduinoEthernetShield
Click on http://arduino.cc/en/uploads/Main/arduino-ethernet-shield-05-reference-design.zip
Unzip.
Open .sch file in Eagle.
Right click on Ethernet connector.
Choose 'Properties'.
Highlight 'SI-40138'.
Press Ctrl-C.
Open Google.
Press Ctrl-V.
Press Enter.
Download http://www.aquaphoenix.com/hardware/ledlamp/reference/si-40138_data_sheet.pdf

Am I missing something here?

liudr

djc,

Thank you! I was thinking too much about having an actual ethernet shield and measuring with a ruler. I didn't think along the line you pointed out. So the entire thing is 15.12mm tall!

liudr

Just did a measure, 15.12mm seems pretty major. Did anyone stack any shields above the official ethernet shield? What's your experience? Do I have to use stacking headers?

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy