Go Down

Topic: Macintosh HDI-20 Floppy Drive Hacking. Need help! (Read 2822 times) previous topic - next topic


I recently got hold of a old Macintosh HDI-20 External floppy drive:
It would be great anyone could point me to a document discussing the protocol of data transfer it uses. If that is too crazy, I would really appreciate anyone who could enlighten me about how I can go about controlling at least the motor positions in this drive. Thanks!


Here is the pinout which should help:


Looks like a pretty raw interface.  I wouldn't be surprised if "PH0" though "PH3" went directly to the coils of the head stepper motor.
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e


@johnwasser: Wow I think you are right! I didn't try it yet but searching "phase0+floppy" got me to this link:
http://www.thesvd.com/svd/apple-dongle.php where it says:
"The head movement mechanism for the Apple is direct drive pulses targeted toward the stepper motor in the floppy hardware. These pulses are labeled phase 0 through phase 3. When the Apple wants to seek the floppy head to another track, it will pulse these phase lines causing the disk stepper motor to advance either "in" or "out" depending upon the previous phase.
For example, if the last pulse was on phase 1, a pulse on phase 2 will step the disk drive head out, whereas a pulse on phase 0 will step the disk drive head in."

Hopefully, I will get it to make some noise once I hook up wires to those pins.

Go Up