Pages: [1]   Go Down
Author Topic: Audio recording VS1033d  (Read 2990 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello there, this is my first post.
What i try to do is a audio recording with the sparkfun Vs1033d breakout borad and save recorded data to sd-card.
I allready solved the "Spi Problem" and did so by writing a Software Spi. I studied the Vs1033d datasheet and tried to implement the VS1033d ADPCM recording example, but still i cant get any signals at the lineIn pin of Vs1033d , because its buffer is full off zeroes, thats what my debug told me. I tried the MCN/MICP Pins as well, same result -> only zeroes.
You can poll a register of Vs1033d named : SCI_HDAT1 ,this indicates the number of words available in buffer. So the buffer has data, well but only zeroes. Has anybody had some success with ADPCM audio recording with VS1033d ?

Attached is my modified Vs1033d Datasheet for comfortable reading and my Arduino code

* VS1033D-Datasheet.pdf (724.67 KB - downloaded 92 times.)
* RecordTest.pde (24.34 KB - downloaded 24 times.)
« Last Edit: February 28, 2011, 05:48:49 am by Strigidae » Logged

Pages: [1]   Go Up
Jump to: