Go Down

Topic: robotics (Read 392 times) previous topic - next topic

NEELISAMPATH

i want to connect RPM Tracking sensor(input) to the board and using this data(input ) operate the two solenoids with in the time  0- 25 milliseconds which ARDUINO BOARD is suitable for my project.

RPM =3000 to 6000
solenoid type = DC
Voltage =12 v
soleniods speed =0 to 25 milliseconds

PaulS

Quote
i want to connect RPM Tracking sensor
Specifically, what sensor?

Quote
operate the two solenoids
What two solenoids?

Quote
with in the time  0- 25 milliseconds
What does that mean? Read the RPM, and then randomly pick a time in that range, activate the solenoid for that amount of time, and then turn it off?

Quote
which ARDUINO BOARD is suitable for my project.
Any of the blue ones.
The art of getting good answers lies in asking good questions.

vinceherman

Any of the blue ones.
Since I can't buy you a beer, we have to settle for Karma++

NEELISAMPATH

#3
Mar 14, 2018, 03:22 pm Last Edit: Mar 14, 2018, 03:54 pm by NEELISAMPATH Reason: more accurate information
1Q:Specifically, what sensor?

A: Engine speed(rpm) tracking sensor


2Q :What two solenoids?

A: push and pull type (Linear motion ) solenoids


3Q: What does that mean? Read the RPM, and then randomly pick a time in that range, activate the solenoid for that amount of time, and then turn it off?

A: yes you are right


4Q:Any of the blue ones.
A: Iam cannot understand this statement

5Q:can add these two atduino boards?
(Arduino Uno REV3 [Original - Made in Italy] ATmega328P) and
(New 2A H-Bridge 2 way DC Motor Driver Module L298P Shield For Arduino)


vinceherman

@NEELISAMPATH,
Do you have links to the datasheets for your sensor and solenoids?

Or have you not decided yet which you will get?

Quote
4Q:Any of the blue ones.
A: Iam cannot understand this statement
This was a humorous way of saying that any arduino will work for this task.

NEELISAMPATH

@NEELISAMPATH,

Do you have links to the datasheets for your sensor and solenoids?
i dont have data sheet


 have you not decided yet which you will get?

 yes



TomGeorge

Hi,
OPs two images,


Tom.. :)
Everything runs on smoke, let the smoke out, it stops running....

TomGeorge

Hi,
What we need are;

  • Data/specs for the sensor.
  • Data/specs for the solenoids.


What is the application?
What are you trying to accomplish?

Tom... :)
Everything runs on smoke, let the smoke out, it stops running....

NEELISAMPATH

Hi,
What we need are;

Requirements of solenoids

1) Voltage                   - 12 v
2) Stroke                     - 80 to 100 mm (pull and push type)
3) Force                      - 700N (operate the 125 cc bike engine valve)
4) Duty cycle               - 30 to 35 mins
5) Response speed**  - 0 to 25 milliseconds
6) Type                       - DC
7) Quantity                 -  2
8) Structure                - Tubular

** Stroke complete in 0 to 25 milliseconds


sensor requirements

"Segolike Car Engine Crankshaft Position Sensor for VW Passat B5 Bora OEM 0261210165"
1)hall type sensor
2)RPM-5000

Go Up