Pages: 1 [2]   Go Down
Author Topic: uC doesn't boot on stripboard, no idea why  (Read 2056 times)
0 Members and 1 Guest are viewing this topic.
Manchester (England England)
Offline Offline
Brattain Member
Karma: 631
Posts: 34488
Solder is electric glue
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

You need a 0.1uF cap from pin 21 to ground.
You also need to connect both pins 7 and 20 to +5 and put a 0.1uF cap to ground on those pins.

Pages: 1 [2]   Go Up
Jump to: