Go Down

Topic: Is it viable? (Read 1 time) previous topic - next topic

Caliber Mengsk

So I've been working on my own arduino compatible platform, and was wondering if you guys think it would be financially viable to even do.

Pretty much is a basic arduino system with FTDI, but also has a 5v regulator on it, with my own PCB design. It'd be on a 2inx1in board with the regulator either sticking straight up, or off the side of the board (by bending the pins at a 90 degree angle). It will have an automatic reset through FTDI as well. The only thing I've removed is a reset button. The reason being, this isn't really for development as much as for a final product. It's not breadboard compatible (though, I don't see it being hard to make an adapter for it to work with a breadboard), unless you just run wires like many circuits.

Also, it'd be a wire wrap setup (male headers for all pins). This wouldn't be for development, and the main idea is to have it be for lighting kits for models and rc vehicles (like rc airplanes with marker lights). Anyway, as far as price, I was thinking $12usd for a kit, and $15 put together. Biggest plus over other cheap arduinos being the voltage regulator and diode (to stop reverse polarity to the circuit).

Anyway, what do you guys think? (I already have the circuit designed, and I'll probably be getting a prototype pcb made soon, so it's not too far off from being in production, but it costs money to make PCB's, and you pretty much have to buy in bulk to be financially viable.)

CrossRoads

So you're going to make your own verion of the Nano, that sells for $29.74 in 100-lot qtys (with pins), but without the reset switch, for $12-15?

http://arduino.cc/en/Main/ArduinoBoardNano
http://www.gravitech.us/arna30wiatp.html

Sounds like a fine goal. Are the FTDI chips that inexpensive?
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Caliber Mengsk

#2
Feb 26, 2011, 10:10 pm Last Edit: Feb 26, 2011, 10:24 pm by Caliber Mengsk Reason: 1


So you're going to make your own verion of the Nano, that sells for $29.74 in 100-lot qtys (with pins), but without the reset switch, for $12-15?

http://arduino.cc/en/Main/ArduinoBoardNano
http://www.gravitech.us/arna30wiatp.html

Sounds like a fine goal. Are the FTDI chips that inexpensive?

O-o I think I said something wrong. I meant FTDI Pin headers, for the USB/FTDI Setups, like this
http://www.sparkfun.com/products/9718

Sorry for the confusion.

CrossRoads

#3
Feb 26, 2011, 11:18 pm Last Edit: Feb 26, 2011, 11:26 pm by CrossRoads Reason: 1
Ok, price seems more achievable now.
What will set it apart from these aside from the reset switch?
the 3.3V & 5V Promini,
http://www.gravitech.us/arpromi5v.html $17
the ardweeny,
http://www.solarbotics.com/products/kardw $10
the RBBB,
http://shop.moderndevice.com/products/rbbb-kit $13
the Boardino
http://www.adafruit.com/index.php?main_page=product_info&products_id=72 $17.50
and others, such as
the no longer procurable iduino clone
http://spiffie.org/kits/iduino/

or this list?
http://www.arduino.cc/playground/Main/SimilarBoards
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Graynomad

I doubt it's ever viable on a $ basis to do your own version of a simple arduino.

However, if you have a special need or just want to try making your own version then go for it.

Quote
but it costs money to make PCB's,

Not much these days. Easy < $100 for a few boards even from a normal fab house. Probably less from one of the batch people.

______
Rob
Rob Gray aka the GRAYnomad www.robgray.com

Go Up