Go Down

Topic: Starting an Elementary Electronics Circuits Class Locally (Read 4 times) previous topic - next topic

Lakes

Would be breadboard based with out getting too deep into electronics theory, sort of get the LED blinking first, then talk about how its done.


terryking228

Hi, lots of INFO and Educational Materials  on the ARDUINO INFO wiki here - http:/arduinoinfo.info

This link: http://arduino-info.wikispaces.com/StarterSetMenu has How-To and Educational information for specific Starter Sets. A $32 Starter Set with Arduino-Compatible board with built-in 3-pin connectors, cables, breadboard, components, servo etc. is here:  http://goo.gl/dfq8l

In a classroom environment, starting off 5 or 10 students connecting things on breadboards can be difficult and frustrating as lots of time is spent finding and correcting connection problems.  Direct cable plug-in of a variety of input and output devices like these "Electronic Bricks" is used by several schools and Universities: http://arduino-info.wikispaces.com/ElectronicBrickStarterSet

Ask for Educational discounts on whatever you use!


DISCLAIMER: Mentioned stuff from my own shop...
Regards, Terry King terry@yourduino.com  - Check great prices, devices and Arduino-related boards at http://YourDuino.com
HOW-TO: http://ArduinoInfo.Info

Go Up