Pages: [1]   Go Down
Author Topic: TPIC6B595 shield  (Read 1512 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 19
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

So I just got my first PCB in from batchPCB tonight.  Its a LED driver shield using the TPIC6B595 shift registers as sinks for an array of LEDs.  I'm using it to control an LED array for a beer pong table I'm building.  Not the most noble effort, but its fun to have something to work on.  Put it all together and was so excited I had to tell someone about it.

Here it is by itself


With the mega


Because its for a ruit table I've only broken out 20 of the 24 sinks.  If there is any interest I can redesign it to have all 24 sinks broken out to jumpers and put it up on batchPCB market along with a bill of parts so it could be put together as a kit.  You can get pretty much everything from digikey for SUPER cheap.

Here is a video of it in action (you might want to mute it unless you want to hear my girlfriend talk about some class she's taking)


Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 217
Posts: 13739
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I miss the background music e.g. "Close encounters of the third kind " smiley
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Pages: [1]   Go Up
Jump to: