Go Down

Topic: Problem GCC compiler with Intel Galileo Gen2. (Read 75 times) previous topic - next topic


Hello everyone,

Since some days i'm tryng to work with a Simatic IOT2020.From the tutorial that I looked on, it is a Intel Galileo Gen2.

My problem is that I can't compile (so obviously not upload) the program with my Arduino IDE.
My error is :
Code: [Select]
In file included from C:\ProgramData\MATLAB\SupportPackages\R2017a\3P.instrset\arduinoide.instrset\idepkgs\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc/usr/include/stdlib.h:34:0,

                 from C:\ProgramData\MATLAB\SupportPackages\R2017a\3P.instrset\arduinoide.instrset\idepkgs\packages\Intel\hardware\i586\1.6.7+1.0\cores\arduino/Arduino.h:27,

                 from sketch\SketchTestIOT2020.ino.cpp:1:

C:\ProgramData\MATLAB\SupportPackages\R2017a\3P.instrset\arduinoide.instrset\idepkgs\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc/usr/include/stddef.h:1:25: error: no include path in which to search for stddef.h

You have to know that I added the stddef.h manually, and others files that was lacking, so it is probably linked. The problem in the first place was at the same place, but it was "stddef.h, no such path or directory". If it is linked, could you help me on how to add it?

Thanks you fory our future help! :)

PS : I hope it is the good forum for this question, I was a bit lost ^^'.


PS : I hope it is the good forum for this question
Is it NOT. You do NOT have a Programming issue, in that YOU are not doing any programming.

You have an issue with trying to use Software on the PC to Interface with your Arduino.

Most likely because YOUR Arduino is NOT one that the software was designed to interface with.
The art of getting good answers lies in asking good questions.

Go Up