Go Down

Topic: Arduino UNO + Pololu USB AVR Programmer : issues (Read 5258 times) previous topic - next topic

Coding Badly


Sounds like it is working just like mine does.  Try this from the command-line...

[font=Courier New]avrdude -v -v -v -patmega328 -cavrispv2 -P\\.\COM5[/font]

GianfrancoPa



Try this from the command-line...

[font=Courier New]avrdude -v -v -v -patmega328 -cavrispv2 -P\\.\COM5[/font]



Under AVRDUDE, no?
Gianfranco

Coding Badly

Quote
Under AVRDUDE, no?


I don't understand.

GianfrancoPa

I have to launch this command line using AVRDUDE, not Arduino software, isn't it?
Gianfranco

Coding Badly

Yes.  You type the command (or copy-and-paste it) into a "dos prompt" (a command-shell).  The command shell can be started by running "CMD".

You will either have to navigate to the folder containing AVRDUDE or modify the PATH.  These update the PATH on my computer so I can run AVRDUDE...

set PATH=%PATH%;C:\Arduino\arduino-0022\hardware\tools\avr\utils\bin
set PATH=%PATH%;C:\Arduino\arduino-0022\hardware\tools\avr\bin
set PATH=%PATH%;C:\arduino\arduino-0022\hardware\tools\avr\etc

Replace "C:\Arduino\arduino-0022\" with the Arduino root folder on your computer.

GianfrancoPa




Try this from the command-line...

[font=Courier New]avrdude -v -v -v -patmega328 -cavrispv2 -P\\.\COM5[/font]



Under AVRDUDE, no?


This line don't functions, I modified it so:

Code: [Select]
avrdude -v -v -v -patmega328p -cavrispv2 -P\\.\COM5

and I get:

Quote

C:\Documents and Settings\Gianfranco>avrdude -v -v -v -patmega328p -cavrispv2 -P
\\.\COM5

avrdude: Version 5.10, compiled on Jan 19 2010 at 10:45:23
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "C:\WinAVR-20100110\bin\avrdude.conf"


         Using Port                    : \\.\COM5
         Using Programmer              : avrispv2
avrdude: ser_send(): write error: sorry no info avail

Gianfranco

Coding Badly

http://forum.pololu.com/viewtopic.php?t=2398

GianfrancoPa

I'm using windows XP SP3...

I opened a thread on pololu forum: http://forum.pololu.com/viewtopic.php?f=3&t=3722&p=17560#p17560
Gianfranco

GianfrancoPa

I've installed the programmer in a different pc, and it function!!
Gianfranco

MGeo

The post in Reply #4 says that the programmer port is assigned to COM12.  The command line in Reply #15 is directing to COM5.  Avrdude will not be able to find the programmer at COM5.

GianfrancoPa


The post in Reply #4 says that the programmer port is assigned to COM12.  The command line in Reply #15 is directing to COM5.  Avrdude will not be able to find the programmer at COM5.


I've changed com port from 12 to 5
Gianfranco

Go Up