Pages: [1]   Go Down
Author Topic: Arduino fio : stk500_recv()  (Read 616 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ok, I received this morning (03-21-2011) 3 arduino fio i had orderd with a FTDI basic to program each of them. I connect one of them with the FTDI basic and.. surprise, nothing append! just the RX led blink 3 time and a nice message : "avrdude: stk500_recv(): programmer is not responding" 2X

Just want know, what is wrong with this card

(I'm speaking very quiet, calme, peace... but I'm really frustrated!!!!!!)

Any idea

(working on macbook pro, FTDI 2.2.16 and the previous version)
Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 227
Posts: 14048
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

IIRC I got a similar error once I selected the wrong  board in the IDE under the tools menu. So check it please
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I check it that.

I try to use Arduino Fio or Tools/Board/Arduino Pro or Pro Mini (8MHz) ATmega328P but no succes

I have 2 XBee 2 and 1 XBee Pro 2.5 so I can use it to upload bootloader in the arduino! Crape

I try to use my FTDI Basic Breakout - 3.3V and I try to mix RXI TXO from FTDI to Aduino Fio with no succes

I try on each of my arduino Fio (I have 3) with no succes

here is the response when i try to upload data

Quote
Binary sketch size: 19466 bytes (of a 30720 byte maximum)
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

I'm using Arduino IDE 0022 on a macbook pro and also try Arduino IDE 0022 on a Windows seven machine.
On the windows machine I have an other message
Quote
Binary sketch size: 1042 bytes (of a 30720 byte maximum)
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

The programme I try to load is the blink led on pin 13
« Last Edit: March 22, 2011, 03:52:44 am by rsilvestre » Logged

Pages: [1]   Go Up
Jump to: