Pages: [1]   Go Down
Author Topic: Interfacing Arduino Pro Mini with RFID and GSM  (Read 1803 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello
I have just started using arduino, so have a lot of doubts coming up.
I am interfacing pro mini with RFID ID-2 with external antenna...
I am using the Wire library.
I wanted to know how do I find out the
address of the RFID; the length ; the reset reader and checksum which is to be given in the code as follows :
eg:

  Wire.beginTransmission(0x42);      // the RFID reader's address is 42
  Wire.send(0x01);                   // Length
  Wire.send(0x80);                   // reset reader
  Wire.send(0x81);                   // Checksum
  Wire.endTransmission();
could you help me out.
Logged

Seattle, WA USA
Offline Offline
Brattain Member
*****
Karma: 638
Posts: 50331
Seattle, WA USA
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
I am interfacing pro mini with RFID ID-2 with external antenna...
I am using the Wire library.
Why? The reader is intended to be connected to a serial port. You can use NewSoftSerial and any pair of digital pins to read data from the device.

The checksum is output by the reader, based on the card presented. It is not an input value.
Logged

Pages: [1]   Go Up
Jump to: