Go Down

Topic: AT93C66 3wire EEPROM help requested (Read 2379 times) previous topic - next topic

Dillon

Has anyone ever used the 93C66 or any of the other 93C series of EEPROMs with the MEGA series ARDUINO systems?  Is it possible to interface these memory chips to the SPI port?  I am kinda unclear on this SPI,  2wire, 3wire stuff.. any help, documentation, schematics, projects etc. that have done this would be helpful

Thanks

Dillon

robtillaart

#1
Mar 28, 2011, 02:01 pm Last Edit: Mar 28, 2011, 02:10 pm by robtillaart Reason: 1
Do you have a link to the datasheet?

-- update --
-http://www.datasheetcatalog.org/datasheet/atmel/doc0172.pdf

you can have I2C (the one with SCL and SDA)

otherwise I think you should use SPI.  The four pins { CS, SK, DI, DO } look like the 4 SPI pins { SS, SCK, MOSI, MISO }

Please read - http://www.arduino.cc/playground/Code/Spi - for details.



Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Dillon

Thanks  that helps a lot.. now I know what kind of device to search for

D

Go Up