Go Down

Topic: NEED HELP designing nano shield (Read 963 times) previous topic - next topic

Aliaa_Adel

Sep 19, 2018, 11:27 pm Last Edit: Sep 19, 2018, 11:29 pm by Aliaa_Adel
HI. i am making an arduino nano shield as a personal project . i am using a CYTRON duel channel motor driver and i don't know how to put on the PCB . do you have an ideas . i am using eagle cad for the PCB.
and if there is a shield template for the arduino nano could please provide the link of it

CrossRoads

Sparkfun has Eagle libraries, pretty sure there is one for the Nano footprint.

If not, both parts are breadboard friendly, yes? So you can just use the 0.1" spaced headers with signals coming off that correspond to the signals of the 2 parts.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Aliaa_Adel

#2
Sep 20, 2018, 12:58 am Last Edit: Sep 20, 2018, 01:00 am by Aliaa_Adel
Sparkfun has Eagle libraries, pretty sure there is one for the Nano footprint.

If not, both parts are breadboard friendly, yes? So you can just use the 0.1" spaced headers with signals coming off that correspond to the signals of the 2 parts.
thank you for the advice . Do you have any idea how to put a motor drive on a PCB . I have searched all day but i didn't get an answer. I want to use the least amount of jumper wires

CrossRoads

Why wouldn't you just solder it to the board onto pads?

Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Aliaa_Adel

Why wouldn't you just solder it to the board onto pads?


Can you explain more please

Go Up