Go Down

Topic: RF Switches SC2262 and SC2272 (Read 8 times) previous topic - next topic


I have been looking in to controling some cheap remote RF Switches.. like http://www.clasohlson.no/Product/Product.aspx?id=155691616.
They use SC2262 on the transmitter and SC2272 on the recievers.  http://electronics-diy.com/pdf/SC2272_eng.pdf and http://www.sc-tech.cn/en/sc2262.pdf

I started by looking at the Library for "RF remote switches" Topic in the old forum http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1216065789. Its supports chips like the PT2262 witch sould be compatible with SC2262, so I thought that it would work for my switches as well. But it seems like its a NO GO.

Basicly what I am trying to do is using the Arduino as the transmitter without pulling wires, just sending the right code over the 433.92 mhz transmitter.

I stumbled across the Arduinoha http://code.google.com/p/arduinoha/, but I havent gotten mutch sense out of it. The problems with theese systems is that then have many names for the same type. They are mostly nobrand things.

My question is if anybody has any experience with any of this, that they could share? I will certainly share my findings here.


Hi there, how are you going with this?,

I am also looking to emulate the SC2262 encoder using the arduino. Jaycar in Australia (and a heap of other devices around the globe) also have this http://www.jaycar.com.au/productView.asp?ID=MS6140

I am happy to share my findings once I get up and running. May even do a shield for this.



May 01, 2011, 08:16 pm Last Edit: May 02, 2011, 02:58 pm by GSI2 Reason: 1
I have just finished part of my project with help of this http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1216065789
you cant use it for chacon receivers and transmitters also.

It was a huge help without this topic I wouldn't get anywhere :P but now I can learn emitted codes from any remote
then send them from Arduino have a look at topic.

I'm also using Arduino to control all windows blinds of my house.


I have thought about automating my window, so I would like to know which actuator you use to turn the window blinds?


I think I see a few "bugs" in that wiring...

Go Up