Go Down

Topic: Duemilanove 168/328 (Read 1 time) previous topic - next topic

Harry.e

Hi,

I have a Duemilanove 168 and tried to program a 328 via the bootloader method. Afterwards I saw that it was only possible with a Duemilanove 328 on board :smiley-sad-blue:.

Is it possible, when I order a AtMeg328 chip with Arduino bootloader, to replace the AtMeg168? Does the hardware supports that and do I then get the programmer facilities then and al the normal Arduino things? Or does the hardware such a change not?

Harry

spycatcher2k

Yes, you can just swap them out - Just remember to choose the 328 duemilanove in boards menu.



Drew.
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

Harry.e

Is there total no possibility to program a AtMeg328 with a 168 Duemilanove?  :smiley-roll:

spycatcher2k

No - You need he extra RAM in the 328 for the program to run.  Easier just to buy a pre-bootloaded chip (or find someone willing to do it for you).



Drew
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

Go Up