Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: Duemilanove 168/328  (Read 1164 times)
0 Members and 1 Guest are viewing this topic.
Harry.e
0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
« on: April 03, 2011, 03:20:50 am »
 Bigger Bigger Smaller Smaller Reset Reset
Hi,

I have a Duemilanove 168 and tried to program a 328 via the bootloader method. Afterwards I saw that it was only possible with a Duemilanove 328 on board smiley-sad-blue.

Is it possible, when I order a AtMeg328 chip with Arduino bootloader, to replace the AtMeg168? Does the hardware supports that and do I then get the programmer facilities then and al the normal Arduino things? Or does the hardware such a change not?

Harry
Logged

spycatcher2k
Scotland
Offline Offline
God Member
*****
Karma: 3
Posts: 513
Have you had your Arduino fix today?
View Profile
WWW
« Reply #1 on: April 03, 2011, 04:26:09 am »
 Bigger Bigger Smaller Smaller Reset Reset
Yes, you can just swap them out - Just remember to choose the 328 duemilanove in boards menu.



Drew.
Logged


Drew.
(MyPCB MANUFACTURING SERVICE)
Duemilanove - UNO - Leonardo - Mega 1280 - Mega 2560 - Pro
& Way too many custom boards.

Harry.e
0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
« Reply #2 on: April 03, 2011, 05:25:47 am »
 Bigger Bigger Smaller Smaller Reset Reset
Is there total no possibility to program a AtMeg328 with a 168 Duemilanove?  smiley-roll
Logged

spycatcher2k
Scotland
Offline Offline
God Member
*****
Karma: 3
Posts: 513
Have you had your Arduino fix today?
View Profile
WWW
« Reply #3 on: April 03, 2011, 05:30:14 am »
 Bigger Bigger Smaller Smaller Reset Reset
No - You need he extra RAM in the 328 for the program to run.  Easier just to buy a pre-bootloaded chip (or find someone willing to do it for you).



Drew
Logged


Drew.
(MyPCB MANUFACTURING SERVICE)
Duemilanove - UNO - Leonardo - Mega 1280 - Mega 2560 - Pro
& Way too many custom boards.

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: