Go Down

Topic: SSC-32 servo controller firmware source code! (Read 3230 times) previous topic - next topic

Apr 05, 2011, 09:13 pm Last Edit: Apr 08, 2011, 01:14 pm by Massimo Banzi Reason: 1
Here you fill find the source code of the SSC-32 servo controller firmware and bootloader! I know that people are not able to find these files because they don't allow any more to download them..but you can download them from here! SSC-32 is a great board to use with Arduino!

Download SSC-32 firmware source code for (Atmega8 and Atmega168) from here:
(links removed by administrator)

Download SSC-32 bootloader source code (Atmega8 and Atmega168) from here:

(links removed by administrator)


Massimo Banzi

I have removed the links because the source code is not open source.

Unless you have written permission from Lynxmotion to distribute the code you can't link it
from here.

m

Vintikas

acording  http://www.lynxmotion.net/viewtopic.php?f=3&t=7313
http://www.hexapodrobot.com/forum/viewtopic.php?f=25&p=5328
ssc-32 open sorce

Benji

It was NOT open source when this post was made.
And according to the post, they plan to reinstate the open source source status, so it is not open source YET

Go Up