Go Down

Topic: Adafruit SoundBoard and Arduino/ not reading audio files (Read 59 times) previous topic - next topic

Ketworks

I am working on a project where a shock sensor serves as a trigger for the audio to play from the Adafruit soundboard (https://www.adafruit.com/product/2220#technical-details-anchor).
The board is connected via an Arduino Uno.

Everything connects nicely, I can read it on the serial monitor, the problem is, although there are audio files (in proper format .ogg) on the board, it does not seem to access it and shows there are no files on the soundboard.

I have tried all the steps from here https://learn.adafruit.com/adafruit-audio-fx-sound-board/troubleshooting but no luck.


If anybody had similar issues, pls let me know, I have an exam coming up and this is a part of my presentation. It played only the test file once I used the GND to number pin advice.

Thanx.
Kata

Go Up