Go Down

Topic: Reading and writing PWM signals (Read 602 times) previous topic - next topic


Please help us in reading the PWM signals that are coming from the receiver .
We have a four channel receiver that outputs 4 PWM signals of 22 ms pulse,the on time of PWM signal varies from 1 ms to 2 ms on moving the analog stick of the transmitter from bottom to top position on channel1 and similarly on other channels.
We are new and have never read the PWM signals in atmega8,

After reading the PWM signals,we have to process those signals and then generate four PWM signals according to our logic .All ur help will be appreciated.

Website: http://www.quadrotor.co.nr
Mayank Gupta


pulsein(pin, HIGH) returns the pulse width in microseconds.

the Servo library will output PWM pulses suitable for driving standard servos.
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e


Thanks a lot,today we have done the same thing and we were really able to read and write the PWM pulse......
Mayank Gupta

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131