Go Down

Topic: Serial to Serial connection on an ATMega (Read 1 time) previous topic - next topic

I'm trying to access a USB 3.3v UART port on my samsung captivate.  see here: http://forum.xda-developers.com/showthread.php?t=1018862

Anyways, I need to make sure I'm doing this right.   Basically, I want to talk directly to it using my computer. The problem is all I get is garbage through the other end while other people are getting real data.  How can I go about emulating a USB UART device with the Arduino?  As far as hardware goes it should be able to handle it.  Every time I search for UART, i get the serial() command used in various contexts.

Here is my code
Code: [Select]
void setup() {
  // initialize both serial ports:
  Serial.begin(115200);
  Serial1.begin(115200);
}

void loop() {
  // read from port 1, send to port 0:
  if (Serial1.available()) {
    int inByte = Serial1.read();
    Serial.print(inByte, BYTE);
  }
  if (Serial.available()) {
    int inByte = Serial.read();
    Serial1.print(inByte, BYTE);     
   
  }
}

Can someone help me communicate with my ATMega to my UART connection?

it's working!

http://youtu.be/GGrFAU1sig8

Go Up