Go Down

Topic: how to chang my ntp server ip address externally (Read 151 times) previous topic - next topic

keltron

like using serial read() fill array like
 


mycode is



// Time Server Port
#define NTP_PORT 123

// Time Server MAC address
byte mac[] = {                    // LM: Substitute fake MAC address associated with IP
//0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF
  0x02, 0xB6, 0x7E, 0x00, 0x00, 0x02 };

// NTP Server IP Address
IPAddress ip(192, 168, 1, 225);   // LM: DHCP address assigned by Asus router.  Change this
                                  //     as appropriate for the implementation context.

KASSIMSAMJI

Electrical Engineer

GypsumFantastic

You say "externally"? Are you talking about changing your router's port forwarding settings?

keltron

pls write full code serial read using fill the a,b,c,d

byte a,b,c,d;


IPAddress ip(a, b, c, d);


Go Up