Pages: [1]   Go Down
Author Topic: [Help Please] LCD Shield Problem...  (Read 1333 times)
0 Members and 1 Guest are viewing this topic.
Bom Princípio - RS
Offline Offline
Sr. Member
****
Karma: 0
Posts: 263
SOFTWARE DEVELOPER, HACKER, RASPBERRY/ARDUINO/QT ENTHUSIAST & METALLICA FAN
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I wonder how many outputs of the Arduino uses the 16x2 LCD shield that already comes with buttons, because I want to create a login system with numeric keypad, and do not know how many pins or departures will use the shield, someone can tell me?

This is the Shield I want buy:
http://4.bp.blogspot.com/_ayaWLRaYxMQ/TUmdATJDcEI/AAAAAAAAC60/ZNkOdGG1Y5I/s1600/lcd.jpg
http://2.bp.blogspot.com/_ayaWLRaYxMQ/TUmdBxDRUrI/AAAAAAAAC64/Uf8jNauXlCU/s1600/lcd+fundo.jpg


Thanks.
Att Marcelo Boeira Jr.
Logged

My Toys:
Raspberry Pi (Model B)
Arduino MEGA 1280: ( Shield LCD 16x2, Ethernet, RFID )
Freescale Kinetis KL25Z [/

Central MN, USA
Offline Offline
Tesla Member
***
Karma: 73
Posts: 7199
Phi_prompt, phi_interfaces, phi-2 shields, phi-panels
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Maybe you can contact "brasilrobotics" said on the display. I can't find helpful things on their site and can't read the language.

Here is their store I found, no info I can find or read:

http://lojabrasilrobotics.blogspot.com/2011/02/lcd-shield-r6000.html

Just a general remark, you don't need a number pad to enter numbers. With the arrow key on the display shield you can enter anything you want. Here is a password panel I made. You simply spend a tidbit more time on each digit:

http://liudr.wordpress.com/2011/03/09/password-panel/
Logged


Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 217
Posts: 13742
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset


Have a look at this screen - http://www.robot-electronics.co.uk/htm/Lcd03tech.htm - It is a serial screen with option to connect a numeric keypad. It connects through I2C or serial so it only uses 2 wires. The only drawback is that AFAIK the serial speed is limited to 9600 baud.
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Western New York, USA
Offline Offline
Faraday Member
**
Karma: 37
Posts: 4331
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

BOEIRA:
If you look at the picture in your first post you will see that the board is actually made by 'Electronic Kit Zone' with their web address silk screened on the board.  At their website you can download a schematic which shows the pins that are being used.  The Arduino equivalents are on the left side of the drawing.  It is using Digital 4,5,6,7,8 and 9 and Analog 0 if I read it correctly.

I think that you might be better off with the solution that Rob came up with.  The 'limitation' of 9600 baud communication is probably not significant when you consider all the delays that are built into any LCD implementation.  By using a serial interface for the LCD you are also free to use another shield if that helps with your ultimate implementation.


Don
« Last Edit: April 16, 2011, 12:57:13 pm by floresta » Logged

Central MN, USA
Offline Offline
Tesla Member
***
Karma: 73
Posts: 7199
Phi_prompt, phi_interfaces, phi-2 shields, phi-panels
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I was only looking at the display and didn't see the obvious.  smiley-red
Logged


Bom Princípio - RS
Offline Offline
Sr. Member
****
Karma: 0
Posts: 263
SOFTWARE DEVELOPER, HACKER, RASPBERRY/ARDUINO/QT ENTHUSIAST & METALLICA FAN
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks for the Help Guys...



Logged

My Toys:
Raspberry Pi (Model B)
Arduino MEGA 1280: ( Shield LCD 16x2, Ethernet, RFID )
Freescale Kinetis KL25Z [/

Pages: [1]   Go Up
Jump to: