14400 and 28800 shows garbage. All other settings are OK.

This is IDE issue, when monitoring serial port with other software, data looks normal.

Example sketch:

void setup() {

Serial.begin(14400);

}

void loop() {

Serial.println("Test");

delay(20);

}

Example of garbage output:

f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n f×n

OS Windows XP SP3, processor Intel P4 2.8GHz, RAM 2 Gb; board Ard.Duemilanove, chip 328 (the same with 168)

FTDI Driver 5/19/2006 ver.2.0.0.0