I have a sensor that produces a very small current between 0 and 55 millivolts, too small for the arduino analog inputs to register.
Well, you can start with this idea:http://ruggedcircuits.com/html/circuit__2.htmlNow, the details are going to be important when working with signals as low as 55mV and down. How much resolution do you need? How careful have you been with noise or is the noise arriving at your op-amp inputs going to swamp your 55mV signal?The TLV2731 op-amp suggested in the circuit above is inexpensive, but its error specifications (e.g., offset error) are magnified by gain. If you try to boost the 55mV signal to the full 5V range (gain of 91) then the offset error (typically 5mV or less) is also multiplied by 91 (455mV). So your signal may end up in the range 0V to 5V but no have ~0.5V of uncertainty in it, just due to op-amp noise.What I'm getting at is: what's your application? How important is precision and noise? etc. etc. There are certainly better choices than the TLV2731 (for more $$$) but it's not worth it if it's not necessary.--The Gadget Shield: accelerometer, RGB LED, IR transmit/receive, speaker, microphone, light sensor, potentiometer, pushbuttons
I have a sensor that produces a very small current between 0 and 55 millivolts
Ask uncle google!http://www.google.com/search?q=amplifying%20thermocouple%20arduino
(I know they sell purpose built amp ICs to do this, but they are $12 per chip. I'd like to try to do it with a less expensive per unit item like an op amp...but I have no idea which one would work.)
Quote from: brucethehoon on Apr 27, 2011, 12:20 amAsk uncle google!http://www.google.com/search?q=amplifying%20thermocouple%20arduinowhen you want to pull the google card, two pointers:1. Use http://lmgtfy.com/ , it's way cooler.2. Actually google it yourself and review the results. In this case, the first result returned is actually this thread so...... :~
sorry about the current/voltage mistake...I'm new to electronics. I'm 90/10 programmer/electronics relative to arduino.
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16