Go Down

Topic: 1024D switch led panel documentation (Read 952 times) previous topic - next topic

iliak

Hi,<br /><br />I have a broken DLink &quot;<a href='http://www.dlink.com/products/?pid=75' class='bbc_url' title='External link' rel='nofollow external'>DES 1024D</a>&quot; network switch. I would like to toy with the leds component (on the left side of the switch), but I can't find any documentation on this. Here's some picture of the &quot;thing&quot;.<br /><br />I would be happy if someone can help me on this.

johnwasser

Each of those HC164 shift registers has 8 outputs.  There are 6 of them so 48 outputs.  Each of the three LED modules has 16 LEDs.  So that's 48 LED's.  I would guess taht the outputs of the HC164's go direct to individual LEDs.

The power and ground lines should be easy to spot.  Each HC164 will have an input line, a shift line, and a latch line.  There will be between 1 and 6 data lines in that wire and between 1 and 6 shift clock lines and between 1 and 6 latch lines.  Find the pinout for the HC164 chip and find out what control pins are connected to what wires.
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

iliak

Ok, I'll investigate this way.
Thank you !

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy