Go Down

Topic: Will the LM35 go up to 200 deg C? (Read 1 time) previous topic - next topic

Ownage

Hey,

This sensor seems popular with the arduino crowd, however I see that it is only rated to 155 deg C.  I need a sensor capable of reading around the range of 200 deg C with the reliability of +- a few degrees.  Do you think I can push the LM35 this high or it won't work?  Any suggestions on other sensors?

Thanks,
Ownage

RuggedCircuits

I don't think you can/should push it.

At higher temperatures an RTD is often used. Omega claims their RTD's are accurate to within ~2C at 200C:

http://www.omega.com/rtd.html

--
The Ruggeduino: compatible with Arduino UNO, 24V operation, all I/O's fused and protected

Ownage

Thanks.  They make you buy in packs of 100 though :(.  I didn't see any other cost effective RTDs.  Is there a cheaper way I can read this temp?

Ownage

Possibly automotive coolant temp sensors?  I live by a junkyard.

RuggedCircuits

How about one of these?

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=615-1045-ND

--
The Rugged Motor Driver: two H-bridges, more power than an L298, fully protected

jluciani

A K or J type thermocouple will read these temperatures.
To interface these you will need a thermocouple interface
IC which is typically an SMD part.

I am working with the MAX31855 and K-type thermocouples.
I should have a sketch and schematic later this week.
I am using my PICOBEE board http://wiblocks.luciani.org/PICO/PICOBEE-index.html
to periodically measure temperature and transmit the timestamped data
to a PC.  The MAX31855 has a 14bit ADC and has a resolution
of 0.25degC. Not sure of the accuracy yet.

(* jcl *)
www: http://www.wiblocks.com
twitter: http://twitter.com/wiblocks

liudr

Thermistors won't last 200 DegC and their housings aren't rated for that temperature. I would use thermocouple too. If you don't need sub DegC accuracy, you can find cheaper infrared remote temperature sensors too.

jluciani

I just added a thermocouple + XBee application hint to my site -- http://wiblocks.luciani.org/docs/app-notes/picobee-tc.html.

I interface a K-type thermocouple using the MAX31885KASA. I use the RTC on the PICOBEE
to periodically interrupt the uC. After an interrupt the temperature is read. The timestamped
data is transmitted using the XBEE.

(* jcl *)
www: http://www.wiblocks.com
twitter: http://twitter.com/wiblocks

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy