Go Down

Topic: 12 LED Display (Read 1 time) previous topic - next topic


I previously posted building a 12 LED light display where students could program their arduino and then move the chip on to the light display. I saw on the Marengo blog (http://www.marengo-ltd.com/blog/?p=150) a programmable circuit for the Arduino. I incorporated it into my light display design to hopefully produce a programmable light display. Hopefully we wreck less chips this way. I would greatly appreciate if someone could look at the Schematic and see if i missed anything.

Original post : http://arduino.cc/forum/index.php/topic,24497.0.html

Schmatic file: https://docs.google.com/leaf?id=0B4G1hbUR7lo-MWUxOWU3ZWEtYTAyZS00NWIyLTk0ODEtZTg2NDY4NjA0MjFm&hl=en_US
High School Engineering Teacher


I would add an extra decoupling capacitor of 0.1uF on the output of the regulator across C2. As C2 is a large electrolytic it won't be able to cope with the higher frequency stuff.
Also a 0.1uF cap on pin 21 to ground.


High School Engineering Teacher

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131