Go Down

Topic: Interfacing a SSR relay to the arduino (Read 20303 times) previous topic - next topic

cycrap

I  got the pic module pre-programmed to do serial LCD output (interfacing a hd47780).  The project is to control a popcorn popper to roast coffee.  I have a module that'll read the temperature every 1/8 second,  output to a computer (router), then my program calculate whether the heating element should be turned on or off.  the program then output the current time, temp, all that info through the pic to LCD, and use the pic's digital output to control the SSR.  When there is no load, everything seems to be fine.  when the SSR  starts to switch on/off, the pic starts to screw up (like sending out garbage to the LCD module, rebooting). I know my program is not sending garbage since it record everything that was sent to the pic. thanks for all the help

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy