used the instruction's @ http://arduino.cc/en/uploads/Tutorial/SimpleBreadboardAVR.png
Got the Following Error's :
Error no.1 for the first time :
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
Error no.2 after exiting the arduino IDE and unplugging and replugging Arduino into USB :
avrdude: Expected signature for ATMEGA328P is 1E 95 0F
Double check chip, or use -F to override this check.
Error 3 after again unplugging and replugging the Arduino from USB :
avrdude: Yikes! Invalid device signature.
Double check connections and try again, or use -F to override
Using UNO i'm seeing such problem's,[glow]Any HELP!