Pages: 1 [2]   Go Down
Author Topic: Bootloader Uploading using Parallel or UNO?  (Read 2867 times)
0 Members and 1 Guest are viewing this topic.
ਪੰਜਾਬ
Offline Offline
Edison Member
*
Karma: 12
Posts: 1619
Another year! Alone! :(
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Showing error ,though implied resistence between reset and 5v to disable the autoreset ,

ERROR:

avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51
Logged

"Real Men can Accomplish  Anything"
-  Website  
- skype : nishants5  

ਫ਼ਤੇਹ ਕਰੂਂ !

Global Moderator
Dallas
Offline Offline
Shannon Member
*****
Karma: 212
Posts: 13085
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset


That error is typically produced when AVRDUDE is unable to communicate with the programmer (in your case an Uno).  Make certain that the Arduino ISP Sketch is loaded on the Uno.  

Quote
though implied resistence between reset and 5v to disable the autoreset
I don't understand.  Have you disabled auto-reset on the Uno?
Logged

Pages: 1 [2]   Go Up
Jump to: