Pages: [1]   Go Down
Author Topic: avrisp (serial version V2.10 firmware)  (Read 1187 times)
0 Members and 1 Guest are viewing this topic.
St. Peters, Mo
Offline Offline
Newbie
*
Karma: 0
Posts: 10
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

How dod I tell the Arduino IDE which com port the avrisp uses?  When I select avrisp, avrdude can't find the port.
Logged

Massachusetts, USA
Offline Offline
Tesla Member
***
Karma: 208
Posts: 8856
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

For "AVR ISP" (protocol STK500 V1) it uses the serial port selected under Tools:Serial Port.

For "AVRISP mkII"  (protocol STK500 V2) it expects a USB device.

If you have a serial AVR ISP but it uses V2 of the STK500 protocol you will need to add an entry to "programmers.txt" for it.

Examples from "programmers.txt":
Quote
avrisp.name=AVR ISP
avrisp.communication=serial
avrisp.protocol=stk500v1

avrispmkii.name=AVRISP mkII
avrispmkii.communication=usb
avrispmkii.protocol=stk500v2
Logged

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

St. Peters, Mo
Offline Offline
Newbie
*
Karma: 0
Posts: 10
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks,
 I was able to modify programmers.txt and add the V2 firmware and it worked.  Caused me a problem when I went back to the usb connection, as it looks like the serial port setting is for both the usb connection for the Arduino as well as the serial avrisp.  Original thats why I didn't think the serial port would have anything to do with the programmer.
Logged

Pages: [1]   Go Up
Jump to: